SRV - Request for Quotation » rheonics :: viscometer and density meter

SRV - Request for Quote Form

Instagram

This field is for validation purposes and should be left unchanged.

Configure SRV

Select the required options for the inline process viscometer SRV. Refer to the SRV-Datasheet for more information.

This field is hidden when viewing the form

Sensor Type

This field is hidden when viewing the form

Sensor

SRV: Inline Viscometer

Material

Sensor probe wetted part(Required)

SS: Stainless steel 316L (1.4435)

C22: Hastelloy C22 (2.4602)

Product Approvals (if required)

EX-certified sensor required:(Required)

Not required

IECEx or ATEX

JPEx

KCs

Installation Geo Location(Required)

Please state language in which you would like to receive the DoC (Declaration of Compliance) and Safety Information.(Required)

Select Certification Enviroment(Required)

Do you need a Hygienic Certification?(Required)

-HS Probe Variant

None

3A: 3-A

EG: EHEDG

Sensor Options

Viscosity Range (select one)(Required)

V1 : 3 - 3000 cP : Standard viscosity range

V2 : 3 - 50,000 cP : Extended viscosity range

V3 : 0.5 - 3000 cP : Extended lower viscosity range

VX : custom : Customer specified viscosity range

Specify the viscosity range for your process fluid :(Required)

Calibration (select one)(Required)

STD : Standard calibration accuracy

CUS : Customer specified calibration accuracy

Please specify the viscosity setpoints and accuracy required(Required)

Electronics (select one)(Required)

Please refer to the Electronics and Communications Page for more information.

E1 : SME-TRD : Transmitter housing with display

E2 : SME-TR : Transmitter housing with solid cover

E3 : SME-DRM : DIN-rail mount housing

E4 : SME-BOX : Desktop version of electronics with 10.4" touchscreen

Electronics (optional)

FT Option - Fixed Transmitter mounted on top of sensor pro

SS Electronics - Stainless Steel Transmitter Housing, available for E1 and E2

Communication

Rheonics electronics are pre-configured with the following communication options.

C1 : 4-20 mA : 3 channels of 4-20 mA analog signal

C2 : Modbus RTU (RS-485) : Modbus RTU over RS-485

C3 : USB : USB 2.0 compliant service and data acquisition port

C4 : Ethernet : Ethernet active on RJ45 connector

Additional FieldBus Communication Options

C5 : Bluetooth LE 4.0 : Bluetooth module for short range communication (only for E1)

C6 : Modbus TCP (Article)

C7 : Ethernet/IP (Article)

C8 : HART (Article)

C9 : Profinet (Article)

C10 : Wireless HART (Article)

Temperature (select one)(Required)

T1 : 125 °C : Sensor rated for operation in process fluids up to 125 °C (250 °F)

T2 : 150 °C : Sensor rated for operation in process fluids up to 150 °C (300 °F)

T3 : 175 °C : Sensor rated for operation in process fluids up to 175 °C (350 °F)

T4 : 250 °C : Sensor rated for operation in process fluids up to 250 °C (480 °F)

T5 : 285 °C : Sensor rated for operation in process fluids up to 285 °C (545 °F)

TX : > 285 °C : Custom Temperature Rating

Specify the maximum working temperature:(Required)

Pressure (select one)(Required)

P1 : 15 bar (200 psi) : Sensor rated for process fluids pressure up to 15 bar (200 psi)

P2 : 70 bar (1000 psi) : Sensor rated for process fluids pressure up to 70 bar (1000 psi)

P3 : 200 bar (3000 psi) : Sensor rated for process fluids pressure up to 200 bar (3000 psi)

P4 : 350 bar (5000 psi) : Sensor rated for process fluids pressure up to 350 bar (5000 psi)

P5 : 500 bar (7500 psi) : Sensor rated for process fluids pressure up to 500 bar (7500 psi)

P6 : 750 bar (10000 psi) : Sensor rated for process fluids pressure up to 750 bar (10000 psi), needs SR-HP

P7 : 1000 bar (15000 psi) : Sensor rated for process fluids pressure up to 1000 bar (15000 psi), needs SR-HP

P8 : 1500 bar (20000 psi) : Sensor rated for process fluids pressure up to 1500 bar (20000 psi), needs SR-HP

Process Connection(Required)

Specify norm and size(Required)

Specify pressure rating, norm and size(Required)

Insertion Length - input insertion length of probe. Specify unit if other than mm.(Required)

Total Probe Length(Required)

Process connection type, norm and size(Required)

Configuration drawings of the X5 long insertion sensor probe with various process connections:

Long insertion probe configuration drawings

Flange (Drawing)
DIN11851 (Drawing)
Triclamp (Drawing)
Threaded (Drawing)
Varinline (Drawing)

Sensor Cable Type(Required)

Standard cable

High-Temperature Cable

IP69K Sensor Cable

Sensor Cable Type(Required)

EX Sensor Cable

M12 Connection Type(Required)

See reference pictures for straight connection and 90° angled connection.

Straight

90° Angled

Sensor Cable (Select length)(Required)

See all available cables in the Sensor cable comparison table.

Sensor Cable (Select length)(Required)

See all available cables in the Sensor cable comparison table.

For custom cable length - specify length in meter or feet :(Required)

Accessories

Select all accessories that are required

Please refer to Accessories Page for list of accessories and their details.
Note: EZB-03X : For EX-SRV, Zener barriers are automatically added to order.

Applications & Industries

Select the applicable industry/industries, where you are looking to use the sensor.(Required)

What is your application? Provide a brief introduction to your process.(Required)

Explore how these sensors are used by other customers for your application in our knowledge base

Ordering Information

Quantity required(Required)

Please enter a number from 1 to 1000.

Additional Comments/Message

Brief description about the application, any other requirements specific to the quote

Requested Date of Delivery

Contact Information

Complete Name(Required)

Name of contact person

Name of company(Required)

Type of company/organization(Required)

Please select the option which best describes your company/organization

Email(Required)

Address(Required)

Street Address City State / Province / Region ZIP / Postal Code Country

Phone(Required)

Company Website(Required)

This field is hidden when viewing the form

Submitted from

Privacy Notice

By clicking submit, you acknowledge that you have read the Privacy Notice.

Sales Terms and Conditions

By clicking submit, you agree to our Sales T&C.

If you are unable to submit this form, you can download the RFQ form as a pdf file. Select the options and fill the information requested and email to

This field is hidden when viewing the form

Order codes

Captcha

SRV – Request for Quotation

SRV - Request for Quote Form

Configure SRV

Sensor Type

Material

Product Approvals (if required)

Sensor Options

Accessories

Applications & Industries

Ordering Information

Contact Information

Order codes

Rheonics at EXPOCOBRE 2026