If you are human, leave this field blank.

RPA - Retractable Probe Assembly - Request for Quote Form

Configure RPA - Retractable Probe Assembly

Select the required options for the sand detector probe RPA. Refer to the RPA product web page for more information. (* indicates required)

Sensor Options

Material *

SS: Stainless steel 316L (1.4435)

Sensor Head *

SRV

SRD

Product Approvals (if required)

EX-certified sensor required:

Not required

IECEx

ATEX

Installation Geo Location (for ATEX certified sensor)

Language (for ATEX requirements) Please state language in which you would like to receive the DoC (Declaration of Compliance) and Safety Information.

Density Range (Only for SRD)

D1 : 0.0 - 1.5 g/cc : Standard range ( 0 -1500 kg/m3 ¦ 0.0 - 12.5 lb/gal )

D2 : 0.0 - 4 g/cc ( max. 4000 kg/m3 ¦ 33 lb/gal )

Density Calibration (Only for SRD)

DCAL1 : Standard density calibration accuracy 0.01 g/cc ( 10 kg/m3 ¦ 0.083 lb/gal ) (Calibrated range 0.4 – 1.5 gm/cc)

DCAL2 : Higher density accuracy 0.001 g/cc ( 1 kg/m3 ¦ 0.0083 lb/gal )

Viscosity Range for SRV

Select one if SRV was selected

V1 : 3 - 3000 cP : Standard viscosity range

V2 : 3 - 50,000 cP : Extended viscosity range

V3 : 0.5 - 3000 cP : Extended lower viscosity range

V4 : custom : Customer specified viscosity range

Viscosity Range for SRD

Select one if SRD was selected

V1 : 1 - 3000 cP : Standard range

V2 : max. 10,000 cP : Extended range

Viscosity Calibration (select one) *

STD : Standard viscosity calibration accuracy (5% of actual reading)

CUS : Customer specified viscosity calibration accuracy (1% of actual reading possible)- specify viscosity setpoints in input box below

If you selected CUS above, specify the viscosity setpoints and accuracy required:

Electronics (select one) *

Please refer to the Electronics and Communications Page for more information.

E1 : SME-TRD : Transmitter housing with display

E2 : SME-TR : Transmitter housing with solid cover

E3 : SME-DRM : DIN-rail mount housing

E4 : SME-BOX : Desktop version of electronics with 10.4" touchscreen

Communication

Rheonics electronics are pre-configured with the following communication options.

C1 : 4-20 mA : 3 channels of 4-20 mA analog signal

C2 : Modbus RTU (RS-485) : Modbus RTU over RS-485

C3 : USB : USB 2.0 compliant service and data acquisition port

C4 : Ethernet : Ethernet active on RJ45 connector

Additional FieldBus Communication Options

C5 : Bluetooth LE 4.0 : Bluetooth module for short range communication (only for E1)

C6 : Modbus TCP (Article)

C7 : Ethernet/IP (Article)

C8 : HART (Article)

C9 : Profinet (Article)

Probe Variant (select one) *

Select the Probe variant to be used with the RPA:

X5 Long Insertion Probe Variant (See Reference here for SRV and SRD)

X8 Teletube Variant (Above 1100mm Insertion Length, See Reference here for SRV and SRD)

Temperature (select one) *

X8 variant can be ordered up to T2 X8 Ex certified variant must be T0 X5 variants can be ordered up to T5

T0 : 75 °C : Sensor rated for operation in process fluids up to 75 °C (160 °F)

T1 : 125 °C : Sensor rated for operation in process fluids up to 125 °C (250 °F)

T2 : 150 °C : Sensor rated for operation in process fluids up to 150 °C (300 °F)

T3 : 175 °C : Sensor rated for operation in process fluids up to 175 °C (350 °F)

T4 : 250 °C : Sensor rated for operation in process fluids up to 250 °C (480 °F)

T5 : 285 °C : Sensor rated for operation in process fluids up to 285 °C (545 °F)

If needed, specify the maximum working temperature:

Pressure (select one) *

P1 : 40 bar (580 psi): Sensor rated for process fluids pressure up to 40 bar (580 psi)

Sensor Cable (Select length) *

See all available cables in the Sensor cable comparison table.

For custom cable length - specify length in meter or feet:

M12 Connection Type (For X5 variant)

See reference pictures for straight connection and 90° angled connection

Standard Straight.

Standard 90° Angled.

Straight High Temperature (only 5m length).

Straight IP69K (only 5m length).

For X8 Variant, the probe back ends in a cable gland.

Applications & Industries

Select the applicable industry/industries, where you are looking to use the sensor. *

Printing and Coating

Industrial Mixing And Grinding

Food And Beverages

Energy And Hydrocarbons

Petrochemicals

Chemical

Automotive

Paper And Packaging

Life Sciences And Medical

Pumping And Pipeline

Marine

Mining, Minerals And Metals

Others

What is your application? Provide a brief introduction to your process. *

Explore how these sensors are used by other customers for your application in our knowledge base

Ordering Information

Quantity required *

Additional Comments/Message

Brief description about the application, any other requirements specific to the quote

Requested Date of Delivery

Contact Information

Name of contact person *

Name of company *

Type of company/organization *

Please select the option which best describes your company/organization

E-mail *

Address *

Country

Phone *

Please provide your contact number.

Extension

Company Website

Privacy Notice

By clicking submit, you acknowledge that you have read the Privacy Notice.

Sales Terms and Conditions

By clicking submit, you agree to our Sales T&C.

Captcha *

reCAPTCHA is required.

RPA – Request for Quotation