HPT-12G

Rheonics HPT-12G is an inline flow cell for high-pressure and temperature applications for the viscometer SRV with a G1/2″ connection. It uses G1/2″ threaded connections for the inlet and outlet ports and seals against the conical face of sensor creating a compact design with minimum fluid volume requirement.

• For high-pressure and temperature applications.

• For applications with low fluid volume requirement.
• Suitable solution for installation in DN5 to DN25 pipes.
• For bigger pipes where a by-pass is needed.
• Easy integration into the process with G 1/2” connections.
• Designed to ensure optimum contact of the fluid with SRV sensing element with low fluid volume.

• An O-ring (15.1×1.6mm) is required for sensor sealing.
• Consider a tilted installation for drainage and cleanability.
• Recommended install according to the flow direction (labeled on surface) but can be reversed.
• Suitable only for SRV with G1/2” threaded connection.

SRV G1/2″: Guidance on the installation of a G1/2” SRV sensor (SRV-X1-12G).

SRV Flow Cells: Overview of flow through cell and spool piece accessories for SRV sensor probe variants.