FTP-15T-XXX

Rheonics FTP accessory is a tee spool piece with a shortened port for a 1.5” Tri-Clamp installation of the SR- sensors. The FTP accessory has welding inlet and outlet ports and its available in 2″, 3”, 4” and 6” sizes. A variant is also avilable with Tri-Clamp port connections.

This piece design allows the sensor to be installed easily in line and sufficiently submerged with a perpendicular orientation to the flow.

• For installation in big lines.

• Shortened port protrudes the SR-Sensor sensing element sufficiently into the flow, reducing dead zones and potential deposits.

• Use correct material, size and placement of seal gasket for sensor connection.
• Be careful not to over-tighten the clamp.
• For the SRD consider the fluid end orientation.
• Downwards position is most common solution and ensures drainability.
• Position the sensor at an angle that ensures presence of fluid. If fluid level is low and with no sedimentation, placing the sensor at lowest position in pipe is recommended.

SRV Tri-Clamp: Overview of the SRV Tri-Clamp variant, installation guidelines, instructions, special considerations and available accessories.

SRD Tri-Clamp: Overview of the SRD Tri-Clamp variant, installation guidelines, instructions, special considerations and available accessories.

Seal-gaskets: Select the correct seal for your application.

SRV Flow Cells: Overview of flow through cell and spool piece accessories for SRV sensor probe variants.

SRD Flow Cells: Overview of flow through cell and spool piece accessories for SRD sensor probe variants.