FET-15T-15T

Rheonics FET accessories are a line of elbow or tee cells with a shortened port for a Tri-Clamp installation of the SR-sensors. The FET-15T-15T refers to a cell with 1.5” Tri-Clamp sensor and process connection (inlet and outlet ports).

This flow design allows the sensor to be installed easily in a 1.5” line with the sensor correctly submerged and parallel to the fluid, which is ideal for the SR-Sensors. It can also be used with expanders and reducers to connect to other size lines.

• Great solution for installation in 1.5” pipes where usually the sensor can’t be installed verically or perpendicular to the flow.

• Protrudes the sensor sensing element sufficently into the flow and avoids stagnation zones around the sensing element.

• Creates an ideal installation of the SR-Sensor across the flow.

• Easy integration into the process with Tri-Clamp connections (accessory with welding ports for inlet and outlet process flange is also available).

• Advantage over standard T-piece due to a shorter port/ferrule for the sensor.

• Use correct material, size and placement of seal gasket between the ferrules.

• Be careful not to over-tighten the clamp.

• Preferred orientation is with the fluid flowing against the sensing element axially.

SRV Tri-Clamp: Overview of the SRV Tri-Clamp variant, installation guidelines, instructions, special considerations and available accessories.

SRD Tri-Clamp: Overview of the SRD Tri-Clamp variant, installation guidelines, instructions, special considerations and available accessories.

Seal-gaskets: Select the correct seal for your application.