HPT-SRV

Rheonics HPT-SRV is a high-pressure and temperature flow cell for the SRV inline viscometer with 3/4” NPT connection. Pressure is rated for up to 10,000 psi (690 bar). Inlet and outlet ports have a 9/16”-18 UNF thread connection.

• For high-pressure and temperature applications.

• Great solution for installation in DN5 to DN25 pipes.

• For bigger pipes where a by-pass is needed.

• Designed to ensure optimum contact of the fluid with SRV sensing element.

• Suitable only for SRV with 3/4” NPT threaded connection. Probe and flow cell are rated for specified pressure only.

• Use proper PTFE tape sealing for NPT sensor connection.

• Consider a tilted installation for drainage and cleanability.

• Recommended install according to the flow direction (labeled on surface) but can be reversed.

• Recommended inlet/outlet adapters: 60-2HM4 Gland 1/4” HP – 316SS. Adapters are not included in the delivery of the flow cell.

SRV NPT: Overview of the SRV NPT 3/4”-14 variant, installation guidelines, instructions, special considerations and available accessories.